Table 2-5 Ons 15216 Edfa2 Front Panel Features - Cisco 15216 EDFA2 Operation Manual

Front Panel
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Table 2-5
Feature
Terminal strip
Threaded grounding holes
Alarm Out
Serial port connection
(EIA/TIA-232)
Label
Status LEDs
Fiber input
Fiber output
Monitor output
Chassis ground lugs
LAN
Cisco ONS 15216 EDFA2 Operations Guide
2-6
ONS 15216 EDFA2 Front Panel Features
Description
Terminal strip for supplying power to the ONS 15216 EDFA2. Attach
AWG 18 stranded power wires to appropriate terminals.
Threaded grounding holes (#10-32) to ground the ONS 15216 EDFA2.
RJ-45 connector used for alarm system connection. (See the
Out Relay Interface (RJ-45)" section on page 3-5
information.)
Serial port for local or remote (modem) data communication
connection. (See
Laser warnings, designation labels, and power level warning.
LEDs indicating status of power, fail, loss of signal, Ethernet link
availability and Ethernet link traffic. (See the
on page
SC/UPC fiber input port.
SC/UPC fiber output port.
SC/UPC port for fiber that taps off 1% of output signal for monitoring
purposes.
Rear panel grounding post to attach chassis ground wire using #8-32
nut.
RJ-45 connector used for 10BASE-T Ethernet connection. For more
information, see the
Chapter 3, "Installation"
3-6.)
"LAN Interface (Ethernet)" section on page
Chapter 2 Technical Specifications
"Alarm
for additional
for additional information.)
"Alarm LEDs" section
3-14.
78-16033-01