Snmp Table Get Command; Snmp Table List Command - Cisco 15216 EDFA2 Operation Manual

SNMP Commands
};

6.6.14 snmp table get Command

Command snmp table get
Syntax Description
snmp table get {IP_address | local} table
Accesses table data. See
Example 6-26 snmp table get Command
ash:hostname:ONS15216 EDFA2> snmp table get local system
attributes
v2.3.0, Serial No DIT0533000P, MAC Addr 00059a383d10"

6.6.15 snmp table list Command

Command snmp table list
Syntax Description
snmp table list {IP_address | local} table
Lists all the data within a table.
Protocol) table. This command displays data by attribute.
Example 6-27 snmp table list Command
ash:hostname:ONS15216 EDFA2> snmp table list local udp
udpInDatagrams.0 =
udpNoPorts.0 =
udpInErrors.0 =
udpOutDatagrams.0 =
udpLocalAddress.172.22.82.19.161 =
udpLocalPort.172.22.82.19.161 =
Cisco ONS 15216 EDFA2 Operations Guide
6-24
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
sysLocation = "";
sysServices = 0;
sysORLastChange = 120;
Example
sysDescr
sysObjectID
sysUpTime
sysContact
sysName
sysLocation
sysServices
sysORLastChange
11341;
135;
1983;
9233;
6-26.
"hostname, Hardware Rev A1, ONS15216 EDFA2,
cerent15216EdfaNode
1330310
"username"
"sysname"
"Lab"
0
125
Example 6-27 below displays the command for the UDP (User Datagram
172.22.82.19;
161;
Chapter 6 ASH Commands
78-16033-01