Date And Time; Table 5-15 Cerent15216Edfasromipmgmtgroup Command Attributes - Cisco 15216 EDFA2 Operation Manual

Chapter 5 SNMP MIB Installation and Configuration

Table 5-15 cerent15216EdfaSromIpMgmtGroup Command Attributes

Attribute
cerent15216EdfaSromIpMgmtEnetAddress
cerent15216EdfaSromIpMgmtDefaultRouterAd
dress
cerent15216EdfaSromIpMgmtEnetSubNetMask The IP subnet mask for the Ethernet management
cerent15216EdfaSromIpMgmtHostName

5.6.2 Date and Time

Command snmp attribute get local cerent15216EdfaRtcDateAndTime
Syntax Description snmp attribute get local cerent15216EdfaRtcDateAndTime
Displays the date and time for the ONS 15216 EDFA2.
The following SNMP command displays the date and time for the ONS 15216 EDFA2 and other time
data:
•
The following SNMP command sets the date and time for the ONS 15216 EDFA2 and other time data:
•
When setting the local time of day, set the time zone first, set the DST offset second, and set the local
time last. Entries must follow this format: "yyyy-m-d,h:m:s.s +h:m". Following the space, the time zone
is set as +/– hours from Greenwich Mean Time (GMT) (also designated as universal coordinated time
(UTC)) followed by a colon and minutes ahead for daylight savings. For example, Pacific Daylight Time
would be –8:60 and Greenwich Mean Time would be +0:0.
Example 5-11
Example 5-11 cerent15216EdfaRtcDateAndTime Display Command
ash:hostname:ONS15216 EDFA2> snmp row display local cerent15216EdfaRtcDateAndTime
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaRtcDateAndTime ::=
{
};
Table 5-16
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
snmp row display local cerent15216EdfaRtcDateAndTime command
snmp attribute set local cerent15216EdfaRtcDateAndTimeLocalString command
displays the ONS 15216 EDFA2 command for displaying the date and time.
cerent15216EdfaRtcDateAndTimeLocal =
cerent15216EdfaRtcDateAndTimeGMT =
cerent15216EdfaRtcDateAndTimeLocalString =
cerent15216EdfaRtcDateAndTimeGMTString =
cerent15216EdfaRtcDateAndTimeTimezone =
cerent15216EdfaRtcDateAndTimeSaving =
cerent15216EdfaRtcDateAndTimeFormsString =
describes the attributes displayed by these commands.
Description
The IP address used by the system Ethernet
management port. If set to 0.0.0.0, IP traffic is not
supported over the Ethernet interface.
The default router (gateway) address for the
network.
port.
The host name of the system.
'07d20716070a2a042d083c'H;
'07d207160e0a2a042b0000'H;
"2002-7-22,7:10:42.4 -8:60";
"2002-7-22,14:10:42.4 +0:0";
-8;
60;
"07/22/2002 07:10:42";
Cisco ONS 15216 EDFA2 Operations Guide
Retrieving Information
5-25