Log Off; Back Up System Configuration - Cisco 15216 EDFA2 Operation Manual

Log Off

•
4.12 Log Off
At the end of a session, the user must log off of the ONS 15216 EDFA2. To log off, use the logoff
command. This is shown in
Example 4-12 Logging Off
ash:hostname:ONS15216 EDFA2> logoff

4.13 Back Up System Configuration

The configuration information for the ONS 15216 EDFA2 can be saved in a file for later use or to
configure other ONS 15216 EDFA2 units. This file contains manufacturing information about the unit
that is being backed up (such as part number and serial number), setup information for the unit (such as
IP address and host name), all configuration information (such as alarm thresholds and pump mode), and
the user database.
The backup file is saved with cyclic redundancy code (CRC) to ensure data integrity, and the user names,
passwords, and other system settings are encrypted for security. The file header, which identifies the
node name, IP address, and software version, is text readable. Only the configuration information and
user database are copied back to the ONS 15216 EDFA2 during a restore.
Back up the system configuration to a file on the FFS.
Step 1
ash:hostname:ONS15216 EDFA2> backup system filename
The system responds with progress information:
Trying to Backup the system configuration to file filename...
Backup SNMP Data...
DONE!...
Backup NON-SNMP Config...
DONE!...
Backup USER/PASSWD Accts...
DONE!...
CRC = 6cce1bd9
Backup DONE!
Cisco ONS 15216 EDFA2 Operations Guide
4-12
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
cerent15216EdfaSromIpMgmtEnetSubNetMask
–
cerent15216EdfaSromIpMgmtDefaultRouterAddress
–
cerent15216EdfaSromIpMgmtHostName
–
BootTable attributes:
cerent15216EdfaBootModuleIndex
–
– cerent15216EdfaBootEntryIndex
– cerent15216EdfaBootType
cerent15216EdfaBootIpAddress
–
cerent15216EdfaBootFileName
–
Example 4-12.
Chapter 4 Provisioning Using ASH and SNMP
78-16033-01