Init-Sys; Rept Alm Dwdm; Table 9-24 Init-Sys Syntax Description - Cisco 15216 EDFA2 Operation Manual

Chapter 9 TL1 Commands

9.7.17 INIT-SYS

Command
INIT-SYS
Reboots the system.
Syntax
INIT-SYS:[<tid>]:<aid>:<ctag>::<ph>;
Example 9-19 INIT-SYS Command
Amp01:ONS15216 EDFA2> INIT-SYS:Amp01:ALL:1234::1;

Table 9-24 INIT-SYS Syntax Description

Parameter
aid
ph

9.7.18 REPT ALM DWDM

Command REPT ALM DWDM
Reports when a DWDM alarm is logged or cleared (derived from cerent15216EdfaAlarmState).
The REPT ALM DWDM messages for Loss of Signal, Gain Out of Range, and Loss of Output Power
Note
are prioritized (in the order just listed) so that only one message can be delivered at one time. For
example, if the ONS 15216 EDFA2 detects both a loss of input signal and a loss of output power at the
same time, it will deliver only the Loss of Signal message to the user. This prioritized filtering of alarms
does not occur with the SNMP delivery of alarms of the ONS 15216 EDFA2.
Syntax
<sid> <date> <time>
<almcde> <atag> REPT ALM DWDM
"<aid>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,:<conddescr>"
;
Example 9-20 REPT ALM DWDM Message
Amp01 2001-06-18 14:50:44
** 142 REPT ALM DWDM
"1:MJ,LOS,SA,6-18,14-50-44,,:\"Loss Of Signal\""
;
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
string
EQPT
ALL
integer
1
Description
EQPT and ALL have same input effect.
Level of initialization. Always 1.
Cisco ONS 15216 EDFA2 Operations Guide
TL1 Commands and Autonomous Messages
9-25