Snmp Table Display Command - Cisco 15216 EDFA2 Operation Manual

Chapter 6 ASH Commands
Addr 00059a383d10";
sysObjectID.0 =
sysUpTime.0 =
sysContact.0 =
sysName.0 =
sysLocation.0 =
sysServices.0 =
sysORLastChange.0 =
sysORID.1 =
...

6.6.13 snmp table display Command

Command
snmp table display
Syntax Description snmp table display {IP_address | local}
Displays table data for the ONS 15216 EDFA2.
table. After typing the command without a table and pressing the Tab key, a list of tables appears. Type
the command with a table name to display the table and its data. Data displayed using this command are
per rows. Attributes are grouped together in rows. See
Example 6-25 snmp table display Command
ash:hostname:ONS15216 EDFA2> snmp table display local
...
ash:hostname:ONS15216 EDFA2> snmp table display local system
CLASS SNMPv2-MIB.system ::=
{
C Addr 00059a383d10";
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
{ cerent15216EdfaNode };
35913255;
"";
"sysname";
"";
0;
120;
{ snmpBasicCompliance };
system
sysOREntry
interfaces
ifEntry
atEntry
ip
ipAddrEntry
ipRouteEntry
ipNetToMediaEntry
ipForward
ipForwardEntry
ipCidrRouteEntry
icmp
tcp
tcpConnEntry
udp
udpEntry
egp
sysDescr = "hostname v3.0.0 ONS15216 EDFA2 v2.3.0, Serial No DIT0533000P, MA
sysObjectID = { cerent15216EdfaNode };
sysUpTime = 35942955;
sysContact = "";
sysName = "sysname";
Example 6-25 displays the command entered without a
Example 6-25.
Cisco ONS 15216 EDFA2 Operations Guide
SNMP Commands
6-23