Rtrv-Th-Dwdm; Table 9-46 Rtrv-Th-Dwdm Syntax Description - Cisco 15216 EDFA2 Operation Manual

Chapter 9 TL1 Commands

9.7.39 RTRV-TH-DWDM

Command
RTRV-TH-DWDM
Retrieves optical threshold and set point values for the ONS 15216 EDFA2.
Syntax
RTRV-TH-DWDM:[<tid>]:<aid>:<ctag>::[<thresholdtype>][,][,];
<sid> <date> <time>
M <ctag> COMPLD
"<aid>,DWDM:<thresholdtype>,,,<thresholdvalue>"
;
Example 9-42 RTRV-TH-DWDM Command and Response
Amp01:ONS15216 EDFA2> RTRV-TH-DWDM:Amp01:ALL:123::LPOUTDEV;
Amp01 2001-06-08 09:00:05
M 123 COMPLD
"1,DWDM:LPOUTDEV,,,1000"
;

Table 9-46 RTRV-TH-DWDM Syntax Description

Parameter
date
time
aid
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
yyyy-mm-dd
hh:mm:ss
1
ALL
Description
Date of origination of TL1 message.
Time of origination of TL1 message.
1 and ALL have same input effect.
Directly affecting the optical signal.
Any or all of the preceding (command input only).
Cisco ONS 15216 EDFA2 Operations Guide
TL1 Commands and Autonomous Messages
9-55