Ed-Pid; Table 9-20 Ed-Pid Syntax Description - Cisco 15216 EDFA2 Operation Manual

TL1 Commands and Autonomous Messages
Table 9-19 ED-NE-GEN Syntax Description (continued)
Parameter
bootfilename1
bootipaddr1
bootrectype2
bootfilename2
bootipaddr2
cli

9.7.13 ED-PID

Command ED-PID
Edits password.
Syntax
ED-PID:[<tid>]:<uid>:<ctag>::<oldpid>,<newpid>;
Example 9-15 ED-PID Command
Amp01:ONS15216 EDFA2> ED-PID:Amp01:JOE:123::OLDPW,NEWPW;

Table 9-20 ED-PID Syntax Description

Parameter
uid
oldpid
newpid
Cisco ONS 15216 EDFA2 Operations Guide
9-20
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
string
string
FLASH
TFTP
string
string
TL1
ASH
Syntax
string
string
string
Description
Boot file name (cerent15216EdfaBootFileName for first entry).
File names are case sensitive.
IP address to boot from if bootrectype1 is set to TFTP
(cerent15216EdfaBootIpAddress for first entry).
Boot record type (cerent15216EdfaBootType for second entry).
Possible values are:
Boot from flash.
Boot through TFTP.
Boot file name (cerent15216EdfaBootFileName for second
entry). File names are case sensitive.
IP address to boot from if bootrectype2 is set to TFTP
(cerent15216EdfaBootIpAddress for second entry).
Default type of command line interface for all EIA/TIA-232
and default telnet port user sessions with the
ONS 15216 EDFA2. Possible values are:
TL1shell interface (manufacturer default).
ASH shell interface – ONS 15216 EDFA2's native interface.
Description
The user's identifier (user name).
The user's old password.
The user's new private identifier (password). Must be a string
of up to 10 characters, where at least 2 are non-alphabetic
characters and at least 1 is a special character. Special characters
are +, #, and %. (defined in Telcordia GR-831-CORE).
Chapter 9 TL1 Commands
78-16033-01