Rtrv-Alm-Dwdm - Cisco 15216 EDFA2 Operation Manual

Chapter 9 TL1 Commands
Table 9-30 RTRV-ALM-ALL Syntax Description (continued)
Parameter
ntfncde
ocrdat
ocrtm
sid
srveff
time

9.7.24 RTRV-ALM-DWDM

Command RTRV-ALM-DWDM
Generates a report on active DWDM alarms.
Note The messages for Loss of Signal (LOS), Gain Out of Range (GAIN), and Loss of Output Power
(LPOUT) are prioritized (in the order just listed) so that only one message can be delivered at one time.
For example, if the ONS 15216 EDFA2 detects both a loss of input signal and a loss of output power at
the same time, it will deliver only the Loss of Signal (LOS) message to the user. This prioritized filtering
of alarms does not occur with the SNMP delivery of alarms of the ONS 15216 EDFA2.
Syntax
RTRV-ALM-DWDM:[<tid>]:<aid>:<ctag>::[<ntfcncde>],[<condtype>],[<srveff>][,,,,,];
<sid> <date> <time>
M <ctag> COMPLD
"<aid>,<ccm>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,:<conddescr>"
;
Example 9-26 RTRV-ALM-DWDM Command and Response
Amp01:ONS15216 EDFA2> RTRV-ALM-DWDM:Amp01:ALL:229::,,;
Amp01 2002-06-20 14:30:00
M 229 COMPLD
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
CR
MJ
MN
CL
NA
m-d
h-m-s
string
SA
NSA
hh:mm:ss
Description
Notification code (maps to cerent15216EdfaAlarmPriority).
Possible values are:
Critical alarm.
Major alarm.
Minor alarm.
Cleared alarm.
No alarm.
Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
Time (hour-minute-second) of the event occurrence (derived
from cerent15216EdfaDateAndTimeString).
Source identifier uniquely identifies the source of a TL1
autonomous command.
Effect on service. Possible values are:
Service affecting.
Non-service affecting.
Time of origination of TL1 message.
Cisco ONS 15216 EDFA2 Operations Guide
TL1 Commands and Autonomous Messages
9-35