Alarm Entry - Cisco 15216 EDFA2 Operation Manual

Retrieving Information
Restore from the backup database from a file (in this case, dbbkup) on the FFS:
Step 1
a.
b.
c.
d.
e.
Save the changes by setting cerentEdfa15216OpSaveConfig = 2.
Step 2
Reboot the ONS 15216 EDFA2 by setting cerentEdfa15216OpReset = 2.
Step 3
After the processor reboots, user names and passwords from the new user database must be used for
access.

5.6.9 Alarm Entry

Command snmp table display local cerent15216EdfaAlarmEntry
Syntax Description
snmp table display local cerent15216EdfaAlarmEntry
Accesses the alarm status.
Example 5-16 cerent15216EdfaAlarmEntry Display Command
ash:hostname:ONS15216 EDFA2> snmp table display local cerent15216EdfaAlarmEntry
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaAlarmEntry ::=
{
};
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaAlarmEntry ::=
{
};
CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaAlarmEntry ::=
{
...
Cisco ONS 15216 EDFA2 Operations Guide
5-36
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Set cerent15216EdfaOpDbFileName = "dbbkup"
Set cerent15216EdfaOpRequestId = 1
Set cerent15216EdfaOpDbRestore = 2.
Wait until cerent15216EdfaOpStatus goes from inprogress to idle.
Verify that cerent15216EdfaOpResult is 0.
Example 5-16
anQuasarAlarmIndex = 1;
anQuasarAlarmID = lcrnt1;
anQuasarAlarmPriority =
anQuasarAlarmState = cleared;
anQuasarAlarmEnable =
anQuasarAlarmDateAndTime =
anQuasarAlarmIndex = 2;
anQuasarAlarmID = lcrnt2;
anQuasarAlarmPriority =
anQuasarAlarmState = cleared;
anQuasarAlarmEnable =
anQuasarAlarmDateAndTime =
anQuasarAlarmIndex = 3;
anQuasarAlarmID = ltmp1;
.
.
shows the cerent15216EdfaAlarmEntry display command.
minor;
enabled;
"2002-10-16,13:49:42.8 -8:60";
minor;
enabled;
"2002-10-16,13:31:55.4 -8:60";
Chapter 5 SNMP MIB Installation and Configuration
78-16033-01