Rtrv-Cond-Dwdm; Table 9-36 Rtrv-Cond-Dwdm Syntax Description - Cisco 15216 EDFA2 Operation Manual

Chapter 9 TL1 Commands

9.7.29 RTRV-COND-DWDM

Command
RTRV-COND-DWDM
Generates a report on the condition (state) of DWDM alarms.
The messages for Loss of Signal (LOS), Gain Out of Range (GAIN), and Loss of Output Power
Note
(LPOUT) are prioritized (in the order just listed) so that only one message can be delivered at one time.
For example, if the ONS 15216 EDFA2 detects both a loss of input signal and a loss of output power at
the same time, it will deliver only the Loss of Signal (LOS) message to the user. This prioritized filtering
of alarms does not occur with the SNMP delivery of alarms of the ONS 15216 EDFA2.
Syntax
RTRV-COND-DWDM:[<tid>]:<aid>:<ctag>::[<condtype>][,,,];
<sid> <date> <time>
M <ctag> COMPLD
"<aid>,<ccm>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,,<conddescr>"
;
Example 9-31 RTRV-COND-DWDM Command and Response
Amp01:ONS15216 EDFA2> RTRV-COND-DWDM:Amp01:ALL:229::LOS;
Amp01 2002-06-20 14:30:00
M 229 COMPLD
"1,DWDM:MJ,LOS,SA,6-20,14-25-30,,,\"Loss Of Signal\""
;

Table 9-36 RTRV-COND-DWDM Syntax Description

Parameter
aid
conddescr
condtype
date
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
1
ALL
LOS
GAIN
LPOUT
yyyy-mm-dd
Description
1 and ALL have same input effect.
Directly affecting the optical signal.
Any or all of the preceding (command input only).
Detailed text description of the event. The conddescr is 1 to 64
characters of ASCII text. See condtype below.
Condition type identifies the type of alarm (maps to
cerent15216EdfaLogEventID). Possible condtype and
corresponding conddescr (in quotes) are:
"Loss of Signal" (input power) alarm
(cerent15216EdfaAlarmLpin).
"Gain Out of Range" alarm (cerent15216EdfaAlarmGain).
"Loss of Output Power" alarm (cerent15216EdfaAlarmLpout).
Date of origination of TL1 message.
Cisco ONS 15216 EDFA2 Operations Guide
TL1 Commands and Autonomous Messages
9-43