Rtrv-Cond-Env - Cisco 15216 EDFA2 Operation Manual

TL1 Commands and Autonomous Messages
Table 9-36 RTRV-COND-DWDM Syntax Description (continued)
Parameter
ntfncde
ocrdat
ocrtm
sid
srveff
time

9.7.30 RTRV-COND-ENV

Command RTRV-COND-ENV
Generates a report on the condition (state) of environmental (power bus) alarms.
Syntax
RTRV-COND-ENV:[<tid>]:<aid>:<ctag>::[<condtype>][,,];
<sid> <date> <time>
M <ctag> COMPLD
"<aid>,<ccm>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,,<conddescr>"
;
Example 9-32 RTRV-COND-ENV Command and Response
Amp01:ONS15216 EDFA2> RTRV-COND-ENV:Amp01:ALL:229::PWRBUSA;
Amp01 2002-06-20 14:30:00
M 229 COMPLD
"PWR-A,ENV:MN,PWRBUSA,NSA,6-20,14-25-30,,,\"Power Bus A Alarm\""
;
Cisco ONS 15216 EDFA2 Operations Guide
9-44
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
CR
MJ
MN
NA
m-d
h-m-s
string
SA
NSA
hh:mm:ss
Description
Notification code (maps to cerent15216EdfaAlarmPriority).
Possible values are:
Critical alarm.
Major alarm.
Minor alarm.
No alarm.
Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
Time (hour-minute-second) of the event occurrence (derived
from cerent15216EdfaDateAndTimeString).
Source identifier uniquely identifies the source of a TL1
autonomous command.
Effect on service. Possible values are:
Service affecting.
Non-service affecting.
Time of origination of TL1 message.
Chapter 9 TL1 Commands
78-16033-01