Tl1 Commands And Autonomous Messages; Act-User; Alw-Msg-All - Cisco 15216 EDFA2 Operation Manual

Chapter 9 TL1 Commands

9.7 TL1 Commands and Autonomous Messages

9.7.1 ACT-USER

Command ACT-USER
Activates user session (login).
Syntax
ACT-USER:[<tid>]:<uid>:<ctag>::<pid>;
Example 9-1
Amp01:ONS15216 EDFA2> ACT-USER:Amp01:JOE:123::***;
Table 9-9
Parameter
uid
pid

9.7.2 ALW-MSG-ALL

Command
ALW-MSG-ALL
Permits or resumes the dispatch of automatic messages from the ONS 15216 EDFA2 that were inhibited
by an INH-MSG call. All alarms in existence at the time that this command restores them are transmitted
via REPT ALM and REPT EVT messages.
Syntax
ALW-MSG-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>][,];
Example 9-2
Amp01:ONS15216 EDFA2> ALW-MSG-ALL:Amp01::123::MJ,LOS;
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
ACT-USER Command
ACT-USER Syntax Description
Syntax
string
string
ALW-MSG-ALL Command
Description
The user's identifier (user name). Can be any combination of up
to 10 alphanumeric characters.
The user's private identifier (password). The password must be
a string of up to 10 characters, where at least 2 are
non-alphabetic characters and at least 1 is a special character.
Special characters are +, #, and %. (defined in Telcordia
GR-831-CORE).
Cisco ONS 15216 EDFA2 Operations Guide
TL1 Commands and Autonomous Messages
9-9