Rtrv-Env; Table 9-41 Rtrv-Env Syntax Description - Cisco 15216 EDFA2 Operation Manual

TL1 Commands and Autonomous Messages
Table 9-40 RTRV-DWDM Syntax Description (continued)
Parameter
gain
preattmeasured

9.7.34 RTRV-ENV

Command RTRV-ENV
Retrieves the ONS 15216 EDFA2 environmental parameter configuration.
Syntax
RTRV-ENV:[<tid>]:<aid>:<ctag>;
<sid> <date> <time>
M <ctag>
"<aid>:PWRBUSMODE=<pwrbusmode>"
;
Example 9-36 RTRV-ENV Command and Response
Amp01:ONS15216 EDFA2> RTRV-ENV:Amp01:ALL:123;
Amp01 2002-06-20 14:30:00
M 123 COMPLD
"PWR-B:PWRBUSMODE=DUPLEX"
;

Table 9-41 RTRV-ENV Syntax Description

Parameter
date
time
aid
pwrbusmode
Cisco ONS 15216 EDFA2 Operations Guide
9-50
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
130 - 220
0 - 110
COMPLD
Syntax
yyyy-mm-dd
hh:mm:ss
PWR-A
PWR-B
ALL
SIMPLEX
DUPLEX
Description
Value of gain setpoint in units of 10 dB when mode is
GAINTEMP (gets
cerent15216EdfaConstGainOverallGainMeasured). Same as
OVERALLGAIN.
Gain pre-attenuation value in units of 10 dB (gets
cerent15216EdfaVariableGainPreAttenuationMeasured).
Description
Date of origination of TL1 message.
Time of origination of TL1 message.
PWR-A, PWR-B, and ALL have same input effect.
Affecting Power Bus A (or both A and B).
Affecting Power Bus B.
Any or all of the preceding (command input only).
Power bus mode setting (cerent15216EdfaPowerBusMode).
Possible values are:
Simplex mode. Requires power only to bus A
(cerent15216EdfaPowerBusMode set to simplex).
Duplex mode (manufacturer default). Requires power to both
bus A and bus B (cerent15216EdfaPowerBusMode set to
duplex).
Chapter 9 TL1 Commands
78-16033-01