Rept Evt Fxfr - Cisco 15216 EDFA2 Operation Manual

TL1 Commands and Autonomous Messages
Table 9-28 REPT EVT DWDM / REPT EVT ENV / REPT EVT EQPT Syntax Description (continued)
Parameter
condtype
(ccm)
condeff
date
ocrdat
ocrtm
sid
srveff
time

9.7.22 REPT EVT FXFR

Command REPT EVT FXFR
Reports autonomous events related to the FTP file transfer (see
Reports when an event related to the file transfer is logged.
Syntax
<sid> <date> <time>
A <atag> REPT EVT FXFR
"<aid>:<filename>,<fxfr_status>[,<fxfr_rslt>][,<bytes_xfrd>]"
;
Cisco ONS 15216 EDFA2 Operations Guide
9-32
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Syntax
MAXCTMPHYSTCHGD
(EQPT)
MINCTMPCHGD
(EQPT)
MINCTMPHYSTCHGD
(EQPT)
CUTOVERRESET
(EQPT)
SOFTWARELOAD
(EQPT)
SOFTWARERESET
(EQPT)
string
TC
yyyy-mm-dd
m-d
h-m-s
string
SA
NSA
hh:mm:ss
Description
"Max Ctmp (case temperature) Hysteresis Changed"
(cerent15216EdfaCtmpMaxHysteresis).
"Min Case Temperature Changed"
(cerent15216EdfaCtmpMin).
"Min Ctmp (case temperature) Hysteresis Changed"
(cerent15216EdfaCtmpMinHysteresis).
(Software) "Reset after Cutover"
(cerent15216EdfaOpCutover).
(New) "Software Load" (cerent15216EdfaOpLoad).
"Software Reset" (cerent15216EdfaOpReset).
Effect of the condition. Always TC (transient condition).
Date of origination of TL1 message.
Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
Time (hour-minute-second) of the event occurrence
(derived from cerent15216EdfaDateAndTimeString).
Source identifier uniquely identifies the source of a TL1
autonomous command.
Effect on service. Possible values are:
Service affecting.
Non-service affecting.
Time of origination of TL1 message.
"COPY-RFILE" section on page
Chapter 9 TL1 Commands
9-12).
78-16033-01