Nortel DMS-100 Series Maintenance Manual page 475

WARNING: You now have access to the PM monitor...proceed with
caution
LTCUP>
TIme,TAsk,Load,Xprompt,CHEaptmr,DAtadump,Uspace,Debug,BPMonito
r,Swerr,C++monitor,Ipc,Verreg,Patches,Flq,Msg6x69,UArtimc,Newm
sging,NWmsgtrc,MSGTr,Chnls,CDm,DYnamic,MTc,Rcvrmon,SChnls,CSm,
DS1,CMr,UTr,OMUnsol,DIagnose,IMage,Audit,MAtediag,CAudit,PRfm,
PErcall,Bigfoot,PARaudt,CP,CNd,Trmtrc,SMsm,SMSS,LTst.
From the SMsm level, we now dump the line config status. We now see that
the first two lines of the A shelf are set to a value of 0. This indicates that the
lines are not equipped in the SLC-96.
LTCUP> sm
Rt config, All chnl bsy, pWrk trc, aBbt, Set ln config
Disp ln config status, disp ln config Image
cHnl aud, send Cfield msg, Line, sMsr, *
UP:SMsm> d 1
SHELF SLOTS: 1| 2| 3| 4| 5| 6| 7| 8| 9| A| B| C|
A 00|11|11|11|11|11|11|11|11|11|11|11|
B 11|11|11|11|11|11|11|11|11|11|11|11|
C 11|11|11|11|11|11|11|11|11|11|11|11|
D 11|11|11|11|11|11|11|11|11|11|11|11|
Value of 0 = unequipped line, Value of 1 = equipped line
Rt config, All chnl bsy, pWrk trc, aBbt, Set ln config
Disp ln config status, disp ln config Image
cHnl aud, send Cfield msg, Line, sMsr, *
UP:SMsm> *
LTCUP>
We can now go to the SMSS level and dump the AB-bit information that is
being received from the SLC-96. This verifies that we are actually receiving
the unequipped AB-bit pattern in the appropriate channels. Once again, we
check PORT 0 CHNL 0 and CHNL 2 for line 0 and line 1 respectively. We now
see that both Chnl 0 and Chnl 2 contain the unequipped AB-bit pattern.
TIme,TAsk,Load,Xprompt,CHEaptmr,DAtadump,Uspace,Debug,BPMonito
r,Swerr,C++monitor,Ipc,Verreg,Patches,Flq,Msg6x69,UArtimc,Newm
sging,NWmsgtrc,MSGTr,Chnls,CDm,DYnamic,MTc,Rcvrmon,SChnls,CSm,
DS1,CMr,UTr,OMUnsol,DIagnose,IMage,Audit,MAtediag,CAudit,PRfm,
PErcall,Bigfoot,PARaudt,CP,CNd,Trmtrc,SMsm,SMSS,LTst.
>LTCUP> smss
XPMTLC0001SMS XPM_PARTITION MICA
Appendix A --11