Nortel DMS-100 Series Maintenance Manual page 164

5-8 Recovery procedures
Recovering Recovering
an SMS an SMS
(continued) (end)
10
11
12
13
297-8231-550 Standard 09.01 August 1998
unit_no is the number of the SMS unit (0 or 1) to test
CAUTION
Data match in progress
An ISTb alarm appears after an RTS passes on both
units. Wait 3-5 min for the system to clear this alarm.
This process allows a dynamic data match between
active and inactive units.
Use the information that follows to determine your next action.
If the system response
is RTS PASSED
is RTS FAILED
Go to the SMS card replacement procedures section in this document and
replace the defective card(s) on the list. Complete the procedure. Return to
this procedure at step 8.
For additional help, contact the next level of support.
The procedure is complete. If the system displays other alarms, refer to the
appropriate alarm clearing procedure. The appropriate procedure is in the SMS
alarm clearing procedures section of this document.
Do
step 13
step 12