Nortel DMS-100 Series Maintenance Manual page 290

7-84 Card replacement procedures
NT6X85
SMS
(continued)
4
5
6
297-8231-550 Standard 09.01 August 1998
Display the DS-1 links associated with the faulty DS-1 interface card by typing
>TRNSL P
and pressing the Enter key.
Record all link numbers, information on faulty links, and any protection line
information. Each 6X85 card has 2 ports; for instance, ports 0 and 1 are on one
6X85 card. Look at the link, RCS location, and port numbers in the MAP
display. The first line indicates that link 0 is routed to RCS location BRCS 00 0.
Link 0 is a protection line.
Example of a MAP response
LINK 0: RCS BRCS 00 0
LINK 1: RCS BRCS 00 1
LINK 2: RCS BRCS 00 2
LINK 3: RCS BRCS 00 2
If
0 protection lines recorded in step
4
1 protection line recorded in step
4
2 or more protection lines
recorded in step 4
Access the carrier level of the MAP display by typing
>TRKS;CARRIER;POST SMS mod_no link_no
and pressing the Enter key.
where
mod_no is 0–127 with an NT40 and 0–255 with DMS SuperNode
link_no is the number of a protection line connected to the faulty card
This command ensures a protection line will be displayed.
Example of a MAP response
CLASS ML OS
TRUNKS 0 0
REMOTE 0 0
NO CLASS SITE SMS
0 REMOTE BRSC 0
Proceed to step 8.
;Protline;
;Protline;
0;CAP MS;STATUS:OK
1;CAP MS;STATUS:SysB
Do
ALARM SYSB MANB
0 0 0
0 5 1
CKT D ALARM SLIP FRAME
3 C 0
;MSGCOND:OPN
;MSGCOND:CLS
step 9
step 5
step 7
UNEQ OFFL CBSY PBSY INSV
0 0 0 0 0
0 0 1 0 10
BER SES STATE
0 <–.7 0 SysB