Nortel DMS-100 Series Maintenance Manual page 139

Mode I to Mode II conversion (two available links)
At the maintenance and administration position (MAP) terminal
1 In Mode II operation, you cannot enter special-service or coin cards in
the first eight slots of each shelf in the remote. To verify this statement,
obtain a hardcopy of table LNINV. To obtain a hard copy of table
LNINV type
>TABLE LNINV
>SEND printer
>POS len
>LIST 96
>SEND PREVIOUS
>QUIT
where
printer is the local printer mnemonic
len is the line equipment number
Example:
>TABLE LNINV
>SEND PRT
>POS KRCS 00 0 00 00
>LIST 96
>SEND PREVIOUS
>QUIT
Also obtain a hardcopy of table LTCPSINV.
2 To change the entry in table RCSINV from Mode I to Mode II, you must
change the SMS ports. To change the SMS ports, enter table LTCPSINV
and select two (NILTYPE) ports not used. To select two (NILTYPE)
ports not used, type
>TABLE LTCPSINV
>POS SMS sms no
Example:
>TABLE LTCPSINV
Converting from Mode I to Mode II 4-3
DMS-100 Family SMS Maintenance Manual XPM10 and up