Nortel DMS-100 Series Maintenance Manual page 141

4 To post and busy the remote from the PM MAP level, type
>MAPCI;MTC;PM
>POST RCS site rcs_no unit_no
>BSY
Example:
>MAPCI;MTC;PM
>POST RSC KRCS 00 0
>BSY
"CALLS WILL BE AFFECTED.
>YES
5 In table RCSINV, change the remote from Mode I to Mode II. To
specify the two ports that changed from NILTYPE to DS1, type
>TABLE RCSINV
>POS rcs no
>CHA
Example:
>TABLE RCSINV
>POS KRCS 00 0
>CHA
MACHINES NOT IN SYNC – DMOS NOT ALLOWED
JOURNAL FILE UNAVAILABLE – DMOS NOT ALLOWED
ENTER Y TO CONTINUE PROCESSING OR N TO QUIT
>Y
Step through the fields until the SHLFGRPMODE field appears. Press
the Enter key to step through the fields.
SHLFGRPMODE: MODE1
>MODE2
PORT: 0
> 10
PORT: 2
Converting from Mode I to Mode II 4-5
PLEASE CONFIRM (YES OR NO)"
DMS-100 Family SMS Maintenance Manual XPM10 and up