Nortel DMS-100 Series Maintenance Manual page 320

Subscriber carrier module-100s

Hide thumbs Also See for DMS-100 Series:

Table of Contents

7-114 Card replacement procedures

297-8231-550 Standard 09.01 August 1998

Open the locking levers on the card to be replaced and gently pull the card

towards you until it clears the shelf.

Ensure the replacement card has the same PEC, including suffix, as the

card you just removed.

Open the locking levers on the replacement card.

Align the card with the slots in the shelf and gently slide the card into the

Seat and lock the card.

Using your fingers or thumbs, push on the upper and lower edges of the

faceplate to ensure the card is fully seated in the shelf.

Troubleshooting