Nortel DMS-100 Series Maintenance Manual page 437

6 Enter the network level and busy the port assigned to the link or links.
Step 4 notes this port.
a.
>NET
b.
>LINKS pair
where
pair is the network #)
c.
>BSY plane link
7 Reenter the PM level and POST the SMS that step 2 notes.
>TRNSL C
Note the state of the busy link.
8 Busy the SMS unit that step 2 notes.
9 To remove the power from the busy SMS unit, set the switch on the
power converter to OFF. Now power the SMS unit down. Repeat this
procedure for all correct SMS units.
Note: When the SMS-R powers down, the system loses subscriber
service for the associated SLC-96. The SLC-96 is an AT&T product.
Refer to AT&T documentation for SLC-96 powering-down procedures.
Advanced troubleshooting procedures 11-11
DMS-100 Family SMS Maintenance Manual XPM10 and up