Nortel DMS-100 Series Maintenance Manual page 269

If TST
passed
failed
18 Return the inactive SMS unit to service by typing
>RTS UNIT unit_no
and pressing the Enter key.
where
unit_no is the number of the faulty SMS unit
If RTS
passed
failed
At the frame
19 Remove the sign from the active SMS unit.
20 Send any faulty cards for repair according to local procedure.
21
Record the following items in office records according to local policy:
date the card was replaced
serial number of the card
symptoms that prompted replacement of the card
Go to step 24.
22 Return to the maintenance procedure that directed you to this procedure. At
the point where a faulty card list was produced, identify the next faulty card on
the list and go to the appropriate card replacement procedure for that card in
this manual.
23 Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
24 You have successfully completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure and continue as
directed.
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-63
SMS
Do
step 18
step 22
Do
step 19
step 23
NT6X69
(continued)