Nortel DMS-100 Series Maintenance Manual page 224

7-18 Card replacement procedures
NT6X40
in a SMS
(continued)
4
5
6
297-8231-550 Standard 09.01 August 1998
Determine the location of the SMS containing the NT6X40 circuit card you are
replacing by typing
>QUERYPM
and pressing the Enter key.
Example of a MAP response:
QueryPM
PM Type: SMS
PMs Equipped: 139 Loadname: NSS05BC
WARM SWACT is supported and available.
SMS 0 is included in the REX schedule.
REX on SMS 0 has not been performed.
Node Status: {OK, FALSE}
Unit 0 Act, Status: {OK, FALSE}
Unit 1 Inact, Status: {OK, FALSE}
Site Flr RPos
HOST 01 E31
Determine the state and activity of the XPM unit in which the card you replacing
is provisioned.
If the state of the PM unit is
ISTb, InSv, SysB, or CBsy, and
active
ISTb, InSv, SysB, or CBsy, and
inactive
ManB
OffL
From the MAP display, determine the state of the mate PM unit.
If the SMS unit is
ISTb or InSv
any other state
PM No.: 0 PM Int. No.:11 Node_No.: 192
Bay_id Shf Description Slot EqPEC
SME 01 18
Do
step 6
step 9
step 9
step 33
Do
step 7
step 35
SMS : 000 6X02AA