Nortel DMS-100 Series Maintenance Manual page 155

>SWACT
A warm SwAct will be performed
This action will take this PM and all of
its subtending nodes temporarily out of service
and <#> active terminals may be affected.
Please confirm ("YES" or "NO"):
>Y
SMS 0 SwAct Passed
13 To translate the P-side links and return to service any P-side links that
are busy, type
>TRNSL P
>RTS LINK link no
Example:
>TRNSL P
LINK 0: RCS REM1 00 2
LINK 1: RCS REM1 00 3
LINK 2: RCS REM1 00 2
LINK 3: RCS REM1 00 3
LINK 4: RCS REM1 00 2
LINK 5: RCS REM1 00 3
LINK 6: RCS REM1 00 2
LINK 7: RCS REM1 00 3
LINK 8: RCS REM1 00 2
LINK 9: RCS REM1 00 3
LINK 10: RCS REM1 00 0
LINK 11: RCS REM1 00 1
LINK 12: RCS REM1 00 0
LINK 13: RCS REM1 00 1
LINK 14: RCS REM1 00 0
LINK 15: RCS REM1 00 1
LINK 16: RCS REM1 00 0
LINK 17: RCS REM1 00 1
LINK 18: RCS REM1 00 0
LINK 19: RCS REM1 00 1
In this example, all links are already in service (that is, STATUS is OK).
MSGCOND for links 0, 2, 4, and 6 is CLS (closed) because REM1 00 2
is offline.
14 To post the RCS converted to Mode II, busy the RCS, and return the
RCS to service, type
>POST RCS rcs no
>BSY
>RTS
Converting from Mode I to Mode II 4-19
0;CAP MS; STATUS: OK ,P;MSGCOND: CLS
0;CAP MS; STATUS: OK ;MSGCOND: OPN
1;CAP S; STATUS: OK ,P;MSGCOND: CLS.
1;CAP S; STATUS: OK ;MSGCOND: OPN
2;CAP S; STATUS: OK ,P;MSGCOND: CLS.
2;CAP S; STATUS: OK ;MSGCOND: OPN
3;CAP S; STATUS: OK ,P;MSGCOND: CLS.
3;CAP S; STATUS: OK ;MSGCOND: OPN
;PROTLINE
;PROTLINE
0;CAP S; STATUS: OK ;MSGCOND: OPN
0;CAP S; STATUS: OK ;MSGCOND: OPN
1;CAP S; STATUS: OK ;MSGCOND: OPN.
1;CAP S; STATUS: OK ;MSGCOND: OPN
2;CAP S; STATUS: OK ;MSGCOND: OPN.
2;CAP S; STATUS: OK ;MSGCOND: OPN
3;CAP S; STATUS: OK ;MSGCOND: OPN.
3;CAP S; STATUS: OK ;MSGCOND: OPN
;PROTLINE
;PROTLINE
DMS-100 Family SMS Maintenance Manual XPM10 and up