Nortel DMS-100 Series Maintenance Manual page 151

>N
REM1 00 2 MIS 0
MODE2 (9)$ N
N
ENTER Y TO CONFIRM, N TO REJECT OR E TO EDIT.
>Y
WARNING: Static data not updated for SMS 0
You must BSY and RTS the SMS
TUPLE CHANGED
JOURNAL FILE INACTIVE
8 Now that the remote changed to Mode II, links 0, 2, 4, and 6 are freed
up. Return the PROTLINEs to their original port names. To complete
this action, you must change the PORT numbers in Table RCSINV to
any two of the four links freed up. To change the PORT numbers in
Table RCSINV to any two of the four links that are free, type
>POS rcs no
>CHA
Example:
>POS REM1 00 2
>CHA
Step through the fields until the PORT field appears. Press the Enter key
to step through the fields.
SHLFGRPMODE: MODE2
PORT: 9
>0
LOOPTEST: N
SHLFGRPMODE:
PORT: 19
>2
LOOPTEST: N
Step through the fields that remain until the tuple to change appears.
Press the Enter key to step through the fields.
REM1 00 2 MIS 0
MODE2 (0)$ N
N
Converting from Mode I to Mode II 4-15
0 1 A 8
MODE2 (19)$ N
MISC_ALARM
MODE2
0 1 A 8
MODE2 (2)$ N
MISC_ALARM
DMS-100 Family SMS Maintenance Manual XPM10 and up
NOLOAD SMS 0
S WP1B
MAJOR 35 DAVIS DRIVE RTP
NOLOAD SMS 0
S WP1B Y
MAJOR 35 DAVIS DRIVE RTP
Y 8
8