Nortel DMS-100 Series Maintenance Manual page 273

Replacing an NT6X78 card in an SMS
At your Current Location
1 Proceed only if you have been directed to this card replacement procedure from
a step in a maintenance procedure, are using the procedure for verifying or
accepting cards, or have been directed to this procedure by your maintenance
support group.
2
CAUTION
Loss of service
When replacing a card in the SMS, ensure the unit
where you are replacing the card is inactive and the
mate unit is active.
Obtain a replacement card. Verify the replacement card has the same product
engineering code (PEC), including suffix, as the card to be removed.
At the MAP terminal
3 Access the PM level and find out which SMS is ISTb by typing
>MAPCI;MTC;PM;DISP STATE ISTB SMS
and pressing the Enter key.
Example of a MAP response
ISTb SMS: 1
4 Access the ISTb SMS by typing
>POST SMS sms_no
and pressing the Enter key.
where
sms_no is 0–127 for NT40 and 0–255 for DMS SuperNode
Example of a MAP response
SMS 3 INSV
Unit0
Unit1
LINKS_OOS CSIDE 0
Act InSv
Inact ISTb
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-67
SMS
PSIDE 0
NT6X78
(continued)