Nortel DMS-100 Series Maintenance Manual page 140

4-4 Converting from Mode I to Mode II
3 Change two NILTYPE ports to DS-1 ports. To make sure that DS-1
297-8231-550 Standard 09.01 August 1998
>POS SMS 0
SMS 0
(0 DS1 DEFAULT N) (1 DS1 DEFAULT N) (2 DS1 DEFAULT N)
(3 DS1 DEFAULT N) (4 DS1 DEFAULT N) (5 DS1 DEFAULT N)
(6 DS1 DEFAULT N) (7 DS1 DEFAULT N) (8 DS1 DEFAULT N)
(9 DS1 DEFAULT N) (10 NILTYPE) (11 NILTYPE) (12 NILTYPE)
(13 NILTYPE) (14 NILTYPE) (15 NILTYPE) (16 NILTYPE)
(17 NILTYPE) (18 NILTYPE) (19 NILTYPE) $
cards are present, type
>CHA
>QUIT
Example:
>CHA
MACHINES NOT IN SYNC – DMOS NOT ALLOWED
JOURNAL FILE UNAVAILABLE – DMOS NOT ALLOWED
ENTER Y TO CONTINUE PROCESSING OR N TO QUIT
>Y
Step through the fields until the port to change appears. Press the Enter
key to step through the fields.
PSLNKTAB: 10 NILTYPE
> 10 DS1 DEFAULT N
PSLNKTAB: 12 NILTYPE
> 12 DS1 DEFAULT N
Step through the fields that remain until the tuple to change appears.
ENTER Y TO CONFIRM, N TO REJECT OR E TO EDIT.
>Y
TUPLE CHANGED
JOURNAL FILE INACTIVE
>QUIT