Nortel DMS-100 Series Maintenance Manual page 345

22 Load the firmware in the inactive SMS unit by typing
>LOADPM UNIT unit_no CC FIRMWARE
and pressing the Enter key.
where
unit_no is the number of the faulty SMS unit busied in step 9
If load
passes
fails
23 Test the inactive SMS unit by typing
>TST UNIT unit_no
and pressing the Enter key.
where
unit_no is the number of the faulty SMS unit loaded in step 20
Example of a MAP response
Test Passed
or
Test Failed
If TST
passes
fails
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-139
SMS
Do
step 23
step 29
Do
step 24
step 29
NTMX77
(continued)