Nortel DMS-100 Series Maintenance Manual page 145

>POST SMS 0
>BSY UNIT 0
>RTS UNIT 0
>SWACT
A warm SwAct will be performed
This action will take this PM and all of
Its Subtending Nodes temporarily out of service
and <#> active terminals may be affected
Please confirm ("YES" or "NO"):
>Y
SMS 0 SwAct Passed
9 To translate the P-side links and return to service any P-side links that
are busy, type
>TRNSL P
>RTS LINK link no
Example:
>TRNSL P
LINK 0: RCS KRCS 00 0
LINK 1: RCS KRCS 00 1
LINK 2: RCS KRCS 00 0
LINK 3: RCS KRCS 00 1
LINK 4: RCS KRCS 00 0
LINK 5: RCS KRCS 00 1
LINK 6: RCS KRCS 00 0
LINK 7: RCS KRCS 00 1
LINK 8: RCS KRCS 00 0
LINK 9: RCS KRCS 00 1
In this example, all links are already in service (that is, STATUS is OK).
MSGCOND for links 0, 2, 4, and 6 is CLS (closed) because KRCS 00 0
is busy.
10 To post the RCS and return the RCS to service, type
>POST RCS rcs no
>RTS
Example:
>POST RCS KRCS 00 0
Converting from Mode I to Mode II 4-9
0;CAP MS; STATUS: OK ,P; MSGCOND: CLS
0;CAP MS; STATUS: OK ,P; MSGCOND: OPN
1;CAP MS; STATUS: OK ,P; MSGCOND: CLS
1;CAP MS; STATUS: OK ,P; MSGCOND: OPN
2;CAP MS; STATUS: OK ,P; MSGCOND: CLS
2;CAP MS; STATUS: OK ,P; MSGCOND: OPN
3;CAP MS; STATUS: OK ,P; MSGCOND: CLS
3;CAP MS; STATUS: OK ,P; MSGCOND: OPN
;PROTLINE
;PROTLINE
DMS-100 Family SMS Maintenance Manual XPM10 and up