Nortel DMS-100 Series Maintenance Manual page 233

30 Determine the status of the XPM unit containing the NT6X40 circuit card you
replaced by typing
>QUERYPM
and pressing the Enter key.
SMS
0 Quit
2 Post_
3 ListSet
4 SMS
5 Trnsl_ Unit0:
6 Tst_ Unit1:
7 Bsy_ QueryPM
8 RTS_
PM Type: SMS
PMs Equipped: 139 Loadname: NSS05BC
WARM SWACT is supported and available.
SMS 0 is included in the REX schedule.
REX on SMS 0 has not been performed.
Node Status: {OK, FALSE}
Unit 0
Unit 1 Inact, Status: {OK, FALSE}
Site Flr RPos
HOST
If the inactive unit status is
InSv
anything else
31
The next action depends on your reason for performing this procedure.
If you were
directed to this procedure from a
maintenance procedure
not directed to this procedure from
a maintenance procedure
SysB ManB
PM 1
SMS 0
0 InSv Links_OOS: CSide
Inact InSv
Act InSv
PM No.: 0
Act, Status: {OK, FALSE}
Bay_id Shf Description Slot EqPEC
01 E31 SME 01
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-27
in a SMS
OffL CBsy
0 15 0
0 0 0
0 , PSide
PM Int. No.:11 Node_No.: 192
18 SMS : 000 6X02AA
Do
step 31
step 35
Do
step 32
step 36
NT6X40
(continued)
ISTb InSv
2 121
0 3
0