GE Healthcare Brivo XR118 Service Manual page 55

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
6.) Connect the monitor's display cable connector to Dock's DVI-D port.
7.) Connect the ethernet cable from Dock's ethernet port to Hospital's network (If required).
Note:
8.) Insert the image workstation into dock's charging slot.
Note:
9.) Connect monitor's power cable to Hospital main power.
10.) Connect power plug to Hospital main power.
6
EVISION
Ethernet PoE port shall be only used to connect wireless AP.
Insert the workstation with the GE side facing the front side of dock to ensure proper
orientation.
Chapter 5 - - Installation & Configuration
B
RIVO
PoE Port
Hospital Network
XR118 S M
ERVICE ANUAL
Page 55