GE Healthcare Brivo XR118 Service Manual page 168

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
1.3.2 Exposure inhibit or long time of image display (> ~25s)
1.) Go to SUIF -> Diagnostics -> Wireless Detector -> SignalStrength.
2.) Click "Start" to begin the test.
•
•
Page 168
6
EVISION
Two wireless communication criteria are required for our system:
- Bandwidth >=15, and signal strength >= -75dbm
For the result:
If "Signal strength" <= Middle, relocate the detector:
- a) Be sure no object is blocking detector's antenna.
- b) Be sure the distance of detector and hardware AP is <= 4m.
If "Signal strength" is Good, but "Bandwidth" <= Bad.
- a) Change the working channel of hardware AP.
-
B XR118 S M
RIVO ERVICE ANUAL