GE Healthcare Brivo XR118 Service Manual page 119

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
4.) Enter the new Detector Name.
5.) Chose to make the new Detector Associated or Non-Associated.
6.) Press [Save]. The new Digital Detector is now registered with the system.
7.) Label the new Digital Detector with the Detector Name.
10.2.2 Adding A New Detector Identified By Color and Shape
1.)
2.) Enter new detector's MAC address.
Note:
3.) Chose Color and Shape for the Select Identification Type.
4.) Chose the Color and Shape from the drop-down list.
5.) Chose to make the new Digital Detector Associated or Non-Associated.
6.) Press [Save]. The new Digital Detector is now registered with the system.
7.) Attach the plastic tag with the appropriate shape and color onto the Digital Detector.
6
EVISION
Figure 5-17 Add a detector By Color and Shape
Press the [Add] button on the Detector Registration screen.
Please detach the detector battery to find the mac address.
Chapter 5 - - Installation & Configuration
B XR118 S M
RIVO ERVICE ANUAL
Page 119