GE Healthcare Brivo XR118 Service Manual page 270

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
Removing A Detector
A Detector must be "Non-associated" detector, to be removed from the system.
If a Detector is "Associated" you must change it to "Non-associated" before
you can remove it from the system.
Note:
1. Select the detector on the Detector Registration screen.
2. Make sure the Digital Detector is "Non-associated".
3. Press [Remove]. A removal confirm message box pops up.
4. Press [Yes]. The Detector is now removed from the system.
Edit A Detector
To edit the name/shape/color of the detector, or change a "Non-associated"to
"Associated", or change a "Associated"to "Non-associated", click the
[Edit] button to proceed.
 To change a "Non-associated" as "Associated" detector, the process is
 To change an "Associated" as "Non-associated" detector:
Detector Management
Page 270
6
EVISION
If a detector has been registered with the wrong MAC address, the user can firstly remove
this detector and then register the detector again with the right MAC address.
the same as register a detector as associated.
- Upon releasing the associated detector successfully, associated
detector shall be updated as "Non-associated" in the detector
registration window.
- If the detector release failed, the associated detector will not become
non-associated.
Figure 12-15
Chapter 12 - - Set Preferences
B
RIVO
Detector Management
XR118 S M
ERVICE ANUAL