GE H
EALTHCARE
D
5461425-8EN, R
IRECTION
3.) Remove old locker from detector and put new locker in the slot.
4.) Push label with linear paper up and put the screw into hole, then tighten the screw with phillips
6
EVISION
After putting the new locker
screwdriver (Torque of Screw: 0.2N·M±0.05N·M).
Chapter 10 - - Renewal parts
Put new locker in the slot
Push label up
B
XR118 S
M
RIVO
ERVICE
ANUAL
Page 247