GE Healthcare Brivo XR118 Service Manual page 203

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
2.2.5 How to check DICOM tags sent by RIS/HIS
1.) Turn off Auto Refresh of worklist in Preferenes->Worklist->Worklist Default Query
2.) Open engineering UI with shortcut 'shfit+ctrl+F5', select 2nd icon to open a terminal.
3.)
4.) Check if there any file under this folder with command 'ls'
5.)
Note:
6.) Add one patient on RIS side
Note:
7.) Do manually query once, one patient will be displayed on worklist screen.
8.) Click 'patient information' button to check patient information
Note:
6
EVISION
Enter into ris_worklists folder with below command
cd /magichome/xruser/config/resources/mwl/worklists/ris_worklists
e.g
Remove all this files with command 'rm *'
These files are RIS entries we get from RIS, they will be update if we do query again.
To make sure there is only one entries under ris_worklists folder, please remove other
'scheduled' patients on RIS server if possible.
Here we provide an example that patient age is not displayed. DICOM tag for patient age is
(0010,1010)
e.g
Chapter 8 - - Troubleshooting
B XR118 S M
RIVO ERVICE ANUAL
Page 203