GE Healthcare Brivo XR118 Service Manual page 257

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
Perform de-
identification
(anonymous patient
images) when sending
to this network host.
Apply "Burn-On-
Send" to images when
sending to this
network host.
Send MPPS N-Create
and N-Set
notification to this
network host.
Make this host the
HIS/RIS source. (Only
one host can be
designated as the
HIS/RIS source.)
DX Images sent as CR
Modality
6
EVISION
Function
Automatically de-identifies any images that the XR118
system sends to this host.
Refer to
about de-identification.
Burns the VOI LUT (Look-Up Tables) into the DICOM header to
be displayed by PACS.
Leaving his option unselected sends all available VOI LUTs
to the DICOM header for PACS to query and apply.
Note:
This node acts as the Destination for receiving the MPPS N-
Create & N-Set Notification. When configured for MPPS, the
System sends information like which exam is in progress,
when a Study is completed, how many images were acquired,
and what was the radiation dose to which the patient was
exposed during that session, etc.
Note:
Designates the host as the DICOM worklist provider.
Defining the Radiology Information System (RIS) and
Hospital Information System (HIS) host allows you to
download patient worklists from those networks to your
system.
Note:
If your PACS system can not accept DX images, then this
option allows the DX images sent as CR modality.
Chapter 12 - - Set Preferences
Description
Chapter 5: Preference Tab
PACS should be configured to read the first VOI LUT for
proper display of images on the Acquisition workstation.
If any update done to the PPS node, need a system restart.
Only one HIS/RIS source may be designated on the system.
Selecting this option will de-select any other hosts as the
HIS/RIS source.
B XR118 S M
RIVO ERVICE ANUAL
for more information
Page 257