GE Healthcare Brivo XR118 Service Manual page 150

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
3.) Suggested Configurations
Table 6-1 Suggested PACS Configurations
No-Burn
GE Centricity RA1000 v1.0,v2.0, v2.1
GE Centricity RA600 v6.1, 7.0
GE Radworks v5.1
GE Pathspeed v8.1 or later
McKesson HRS v3.3, 3.3.2
Fuji Synapse v3.0, 3.1
Agfa IMPAX v4.5, 5.2
Philips
RealTime iPACS Viewer v5.0
Page 150
6
EVISION
i.) Highlight PACS Test Image 6 in the Images list
ii.) Click the appropriate PACS Network Host in the Destination icon list
f.) Review images on PACS
i.) Bring PACS Test Images 1 and 6 up on the PACS review workstation.
• The images can be identified by the watermark image number next to the GE
logo inside the chest image region.
• Verify (if possible) that Image 1 is displayed with a VOI-LUT, and Image #6
is displayed with a Linear LUT
ii.) If PACS Test Images 1 and 6 appear visually identical (equal number of bright/
dark bands), the PACS supports VOI-LUT. **: Configure PACS as No-Burn
iii.) If PACS Test Images 1 and 6 appear visually different (different number of bright/
dark bands), or chest region has saturation in lung or abdomen, the PACS either
does not support VOI-LU or applies it incorrectly. **: Configure PACS as Burn-on-
Send
iv.) Record results in
** For more information, see Background and In-Depth Instructions below.
Table 6-1 should be used as a guideline in addition to the tests above to determine if a PACS
system should be configured for Burn-on-Send. This table considers only whether a PACS
supports VOI-LUTs.
Section 10.0 - PACS / Image Display Test Image
Table 6-2, line numbers 3 and 4
Burn-on-Send
GE Pathspeed v7.12, 8.0
GE AW v3.1, 4.0
Kodak DirectView v4.3
Kodak DirectView v5.1, 5.2
Kodak Directview(CEMAX ICON), v4.3
Merge eFilm, v2.0, 2.1.0
Stentor iSite v3.0, v3.3.1
Siemens Magic View 300
VA Vista
B XR118 S M
RIVO ERVICE ANUAL