GE Healthcare Brivo XR118 Service Manual page 59

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
6.2 Detector Battery Installation
To replace a battery:
1.) Release the two latches at the back of detector. The battery pops up for replacement.
2.) Place a fully-charged battery in the battery footprint in the detector so that the contacts on the
6.3 Detector Battery Charging
Batteries are shipped at 30% to 50% state of charge. It's recommended to charge the battery before
the first usage.
If the battery capacity is low (see the detector LED color definition in Operating Manual), please use
the charging slots on system dock to charge the battery.
For how to charge the detector battery, please refer to the Operating Manual.
6
EVISION
back edge of the battery are inserted first.
Chapter 5 - - Installation & Configuration
Figure 5-12 Open the box
B XR118 S M
RIVO ERVICE ANUAL
Page 59