GE Healthcare Brivo XR118 Service Manual page 73

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
8.4.3 Restore Protocol Data Base
1.) Be assure the system language config are the same with the backed database. From the
2.) Select [Preferences] and then [Protocols].
3.) Insert the CD/DVD with the saved protocols database into the DVD drive.
4.) Click the [Retrieve] button.
5.) A message appears: Press OK to continue with Protocol Database retrieve.
6.) Click the [OK] button. The saved protocol database is now loaded onto your system.
7.) Remove the CD/DVD from the DVD drive and store it in a safe place.
8.4.4 Restore System Images
1.) Use the [Eject] option in [Image Tools] button to open the CD tray on the PC.
2.) Select Eject CD from the drop-down list. The DVD drive tray will open.
3.) Place the CD/DVD with the images onto the tray and close.
4.) Click the [Media] button. The exam list updates to now show you the images stored on the CD/
5.) Select the exams you wish to retrieve. using the mouse.
6.) Click the [Local_DB] button as the destination (located on the lower left corner of the screen).
7.) A message appears: Selected images will be copied to local_DB. Select "OK" to confirm.
8.) Click [OK], when it appears.
•
6
EVISION
Worklist screen, click the Utilities icon. The Utilities screen appears.
DVD.
To see the status of the exams being copied:
i.) Click [Transfer Log] at the bottom of the Image Management screen.
ii.) The Transfer Log screen appears.
iii.) Click the [Close] button to close the screen and return to the Image Management screen.
Chapter 5 - - Installation & Configuration
B XR118 S M
RIVO ERVICE ANUAL
Page 73