Chapter 11 Master Interconnect System Map; Scope; Symbols/Conventions - GE Healthcare Brivo XR118 Service Manual

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION EVISION
Chapter 11 - Master Interconnect System Map
Section 1.0

Scope

This section describes the MIS (Master Interconnection System) map.
Section 2.0

Symbols/Conventions

The equipment outlines on the map identify where connections are made. These outlines are usually major assemblies. Internal divisions show
modules/circuit boards. These components are identified using the component location codes defined for each product. (If you are unfamiliar with
these codes refer to the schematics direction for any major product. It is worth your effort to learn these codes.)
MIS runs are identified by lines between connection points, with the MIS number in an oval at each end of the line.
6
Chapter 11 - - Master Interconnect System Map
B XR118 S M
RIVO ERVICE ANUAL
Page 249