GE Healthcare Brivo XR118 Service Manual page 81

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
1.) Select Product Network Filter from the Configuration menu.
2.) Select the [Expert] Tab.
3.) For TVA/RCOC support, do the following:
4.) Click on [Apply].
9.6.3.2 System Installation
1.) The "Default" configuration for the firewall should be "On". If "Off" is selected, set it to "On" and
2.) Remaining options should be remain as default values, unless otherwise instructed by InSite.
6
EVISION
a.) Port 5800
I.) Enter the Port number 5800.
II.) Choose tcp from the Protocol drop-down list.
III.) Enter 150.2.0.0/255.255.0.0 as the Allowed IP's.
IV.) Click on [Add.]
b.) Port 5900
I.) Enter the Port number 5900.
II.) Choose tcp from the Protocol drop-down list.
III.) Enter 150.2.0.0/255.255.0.0 as the Allowed IP's.
IV.) Click on [Add.]
"Apply".
Chapter 5 - - Installation & Configuration
B XR118 S M
RIVO ERVICE ANUAL
Page 81