GE Healthcare Brivo XR118 Service Manual page 84

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
9.9 DICOM Configuration
See the Operator's Manual for instructions on how to configure DICOM on this system.
The following worksheets should be used to capture and archive your system's DICOM
configuration for future reference. Records configuration information in the work sheets that follows.
Place worksheets in a safe place so that they may be referenced in the future if needed.
9.9.1 Network Hosts
Note: For network host, please acquire mandatory parameters (Application Entry Title \ Network Address
\ Port Number) from hospital supervisor.
Note: Brivo XR118 HIS/RIS successful connection can be guaranteed only when HIS/RIS server is based
on the DICOM standard.
After configured, click "C-Echo Test" to confirm the network connectivity.
9.9.1.1 Host Tab
Table 12-7 Host Tab
Host Label
Application Entry Title
Network Address
Port Number
Query Retrieve
Storage Commitment
Storage Commitment -
Application Entry Title
Storage Commitment -
Network Address
Storage Commitment -
Port Number
Comments
9.9.1.2 Preference Tab
Values for each network node are configured using the Workstation PC. Generally, options 1, 2 and
3 are enabled (checked) for remote viewing stations, PACS, etc...
•
•
•
•
Page 84
6
EVISION
Attribute Host Device 1
Option 1 - Check this option if the remote host being configured should be able to Query and
get a response of a list of images on the workstation PC.
Option 2 - Check this option if the remote host being configured should be able to Retrieve any
of images returned on the image list (pull) from the workstation PC.
Option 3 - Check this option if the remote host being configured should be able to Send / Push
any of the images in its local database to the workstation PC.
Option 4 - This option will never be used since the workstation PC does not yet generate multi-
frame images.
Section 9.0 - System Configuration
B XR118 S
RIVO
Host Device 2
M
ERVICE ANUAL
Host Device 3