GE Healthcare Brivo XR118 Service Manual page 211

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
Item
<L>
<M>
<W>
<b>
<e>
<h>
<j >
<k >
<l >
<w>
8.) Replacing Text
Item
<C>
<R>
<S>
<c>
<cc>
<r>
<s>
9.) Searching for Text or Characters
Item
<,>
</>
<;>
<?>
<F>
<N>
<T>
<f>
<n>
<t>
10.) Manipulating Character/Line Formatting
6
EVISION
Move the cursor to the first non-white space character on the bottom of the screen.
Move the cursor to the first non-whitespace character on the middle of the screen.
Move forward to the beginning of a word, skipping over punctuation.
Move the cursor back one word. If the cursor is in the middle of a word, move the
cursor to the first character of that word.
Move the cursor forward one word. If the cursor is in the middle of a word, move the
cursor to the last character of that word.
Move the cursor to the left one character position.
Move the cursor down one line.
Move the cursor up one line.
Move the cursor to the right one character position.
Move the cursor forward one word. If the cursor is in the middle of a word, move the
cursor to the first character of the next word.
Change to the end of the line from the current cursor position.
Replace characters on the screen with a set of characters entered, ending with the
<ESC> key.
Change an entire line.
Change until a period (.) is found.
Changes the current line. A count changes that many lines.
Replace one character under the cursor. Specify a count to replace a number of
characters.
Substitute one character under the cursor, and go into insert mode. Specify a count
to substitute a number of characters. A dollar sign ($) will be put at the last character
to be substituted.
Repeat the last <f>, <F>,<t> or <T>command in the reverse direction.
Search the file downwards for the string specified after the </>.
Repeat the last <f>, <F>, t or <T> command.
Search the file upwards for the string specified after the <?>.
Search the current line backwards for the character specified after the <F>
command. If found, move the cursor to the position.
Repeat the last search given by </> or <?>, except in the reverse direction.
Search the current line backwards for the character specified after the <T>
command, and move to the column after the if it's found.
Search the current line for the character specified after the <f> command. If found,
move the cursor to the position.
Repeat last search given by </> or <?>.
Search the current line for the character specified after the <t> command, and move
to the column before the character if it's found.
Chapter 8 - - Troubleshooting
B XR118 S
RIVO
Description
Description
Description
M
ERVICE ANUAL
Page 211