Ap Assembly Preparation - GE Healthcare Brivo XR118 Service Manual

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
Section 5.0

AP Assembly Preparation

Note:
5.1 AP assembly connection
5.1.1 Unpacking
5.1.2 Connection
1.) Take out wireless AP and PoE Ethernet Cable.
2.) Connect the PoE ethernet cable from Dock's ethernet PoE port to AP which will be located in
Note:
3.) The wireless AP will automatically boot up if the dock is powered on and image workstation is
Page 56
6
EVISION
Because wireless performance will be tested in
Assembly location may be changed, please do not install AP Assembly in this step, just place
it at Default location or Adjusting range according to room layout.
Access Point
Figure 5-8 Unpack AP assembly & PoE ethernet cable
the exam room.
The end which has USB connector should be used to connect AP.
inserted into dock.
Section 5.0 - AP Assembly Preparation
B XR118 S
RIVO
AP Assembly Installation on page 122
PoE Cable
M
ERVICE ANUAL
and AP