GE Healthcare Brivo XR118 Service Manual page 99

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
TAB Attribute
Film 8 x 10in
Size
10 x 12in
10 x 14in
11 x 14in
14 x 14in
14 x 17in
24 x 24cm
24 x 30cm
The following configurations must be configured by the Fuji printer representative to print correctly sized images:
• LUT1 as SAR17 for calling AE_TITLE.
• Trim width at 1 pixel for calling AE_TITLE.
• Globally configure "a margin between image" for 0 pixels.
• Globally configure "Image layout" for spread.
• A densitometer filter (FUJI part number 605S0003) must be used when performing printer calibration.
ONLY 14 x 17 film should be used with this printer. Any other film size used may print films with incorrect
measurements
6
EVISION
Value
Pixel Width =
Pixel Width =
Pixel Width =
Pixel Width =
Pixel Width =
Pixel Width = 4072
Pixel Width =
Pixel Width =
Chapter 5 - - Installation & Configuration
B
RIVO
Pixel Height =
Pixel Height =
Pixel Height =
Pixel Height =
Pixel Height =
Pixel Height = 4972
Pixel Height =
Pixel Height =
XR118 S M
ERVICE ANUAL
Comments
Page 99