Ricoh SP 8400DN Field Service Manual page 2109

No.
A Edge Guide
B Upper Tray Exit Sensor
C Jogger HP sensor
D Jogger Motor
No.
A Stack Feed-out Belt (with stack feed-out pawl)
B Stack Feed-out Motor
Edge Guide
This machine applies a corner staple to the paper stack while it is hanging out of the exit. At this time, to prevent
the paper stack from dropping to the upper tray, the edge guide [D] comes out of the unit. The edge guide operates
as follows:
1. When a job starts, the upper tray guide plate [A] shifts up.
2. The edge guide motor [B] drives to push the edge guide [D] out. The edge guide retreats into the machine
Name
Name
No.
E Jogger Fence
F Staple Tray Paper Sensor
G Edge Guide HP Sensor
H Edge Guide Motor
No.
C
D
2.Detailed Descriptions
Name
Name
Trailing Edge Fence
Stack Feed-out Pawl HP
51