Ricoh SP 8400DN Field Service Manual page 2189

2.Detailed Descriptions
Number of Fold Operations
You can change the strength of the fold by changing the number of times that the crease roller mechanism presses
the paper to make the fold. To do this, use SP6-315-001.
SP No.
6-315-001
For each fold, you can specify the number of times that the mechanism presses the paper from 0 to 4.
As the default, the number of times is set to 1. You can change the number with this SP setting.
Note: If you set the SP value to 0 (-1), the number of times is set to 0.
If the number of times increases, the throughput decreases.
The internal multi-fold unit makes a crease fold by rotating the crease roller [A], which has a protrusion [B] as
shown below, along the fold of the paper [C]. (Paper feed direction [D])
34
Name
Set Number of Creasing
[Min to Max/Init./Step]
[0 to 4 / 1 / times]
0: -1
1: 0
2: 1
3: 2
4: 3