Management Port Leds In Ex2300 Switches - Juniper EX2300 Series Hardware Manual

Table 5: System LEDs in EX2300-24MP and EX2300-48MP Models
LED Label
SEE ALSO
Chassis Component Alarm Conditions on EX2300 Switches | 233
Check Active Alarms with the J-Web Interface | 235
Understand Alarm Types and Severity Levels on EX Series Switches | 231

Management Port LEDs in EX2300 Switches

The management port on an EX2300 switch has two LEDs that indicate link/activity and port status.
The EX2300 switches except the EX2300-C switch and EX2300-24MP and EX2300-48MP models have
the management port on the rear panel; the EX2300-C switches and EX2300-24MP and EX2300-48MP
models have the management port on the front panel. See
31, Figure 22 on page 32, and
Figure 20: LEDs on the Management Port on EX2300-C Switches
Color
Unlit
Figure 23 on page 32.
(Continued)
State and Description
The switch is powered off or halted.
Figure 20 on page 30, Figure 21 on page
30